Pebble Wash

Pebble Wash is also commonly called exposed aggregate finish. The 12mm thick combination of pebbles and cement mix at the ratio of 70% and 30% is laid on the well prepared substrate such as cement sand rendering or wall plastering. While the fresh lay pebbles cement topping is still in plastic stage, special brush is deployed to remove the surface of cement slurry to expose the pebbles. The next day, the balance cement stains is to be treated with acid wash. Lastly the finish surface is then sealed with a 2 coats of solven base acrylic sealer to protect from dirt and stains as well as improves the overall strength of the floor surface cum gives the job an attractive wet-look.

 

Pebble Wash

Pebble Wash

Zone Pave Builder Zone Pave Builder All Rights Reserved.